Colorado Av Club Forums: Mod GTG at Springs Auto and Truck

Author

Message

beercrazy
Senior Member

Joined: 19 May 2007
Online Status: Offline
Posts: 195

Posted: 25 Sep 2007 at 1:26pm

Looks like its an 8 to 4 day.....dont forget guys lunch is provided. There is a map link for mapquest in the earlier part of this thread. Ken

See ya all there!!!

Whats you AVitude telling you????

IP Logged

avalanchuck
Admin Group

Joined: 30 Oct 2006
Online Status: Offline
Posts: 491

Posted: 26 Sep 2007 at 12:46pm

Ok in an effort to get all the info in one blurb so I can email everyone one last time...

Originally posted by duramaxmaxman

Ok cast and crew were all set for the 30th of September, I will be at the shop there from 8 in the morning till the last person leaves or the boss leaves..I have in the past week purchased a tech 2 scanner and have got the GM link set up to where I can do vehicle programming just like the dealership would do only with me it FREE!! The nice price... I used my truck as the guniea pig for programm updates and to my surprise I had 4 updates that needed to be done, 1 critical transmission shift update for a delayed/soft 1-2 shift. I uploaded the programm just today and have noticed a substancial shift improvement afterwards, so If ya havent done any PCM/VCM updates lately....well now that too can be handled. For those who dont know the location heres a mapquest link.

Springs Auto and Truck

Any questions anyone might have just post and Ill answer them as quick as possible. Hope for a good turn out. maybe it can be a bi-annual thing.... Ken

Originally posted by duramaxmaxman

Looks like its an 8 to 4 day.....dont forget guys lunch is provided. There is a map link for mapquest in the earlier part of this thread. Ken

See ya all there!!!

Edited by avalanchuck - 26 Sep 2007 at 12:49pm

2003 Light Pewter Metallic Z71 WBH

IP Logged

avalanchuck
Admin Group

Joined: 30 Oct 2006
Online Status: Offline
Posts: 491

Posted: 27 Sep 2007 at 1:05pm

Originally posted by avalanchuck

Ok in an effort to get all the info in one blurb so I can email everyone one last time...

Springs Auto and Truck

Any questions anyone might have just post and Ill answer them as quick as possible. Hope for a good turn out. maybe it can be a bi-annual thing.... Ken

Originally posted by duramaxmaxman

Looks like its an 8 to 4 day.....dont forget guys lunch is provided. There is a map link for mapquest in the earlier part of this thread. Ken

See ya all there!!!

Email sent out yesterday!

Those heading down from Denver care to meet up somewhere and carAVan down to the Springs?

Edited by avalanchuck - 27 Sep 2007 at 1:12pm

2003 Light Pewter Metallic Z71 WBH

IP Logged

justjr
Senior Member

Joined: 23 Feb 2007
Location: United States
Online Status: Offline
Posts: 408

Posted: 28 Sep 2007 at 8:02am

Give me a call and let me know when and where.

Just Drive Man!!!

IP Logged

CO_AVS_FAN
Member
Member

Joined: 02 Mar 2007
Location: United States
Online Status: Offline
Posts: 22

Posted: 28 Sep 2007 at 4:24pm

Let me know what time you want to meet and where as well. I will be coming from Conifer. So either somewhere on Santa Fe or in Castle Rock is fine with me.

IP Logged

justjr
Senior Member

Joined: 23 Feb 2007
Location: United States
Online Status: Offline
Posts: 408

Posted: 29 Sep 2007 at 6:40am

On Santa Fe would work for me. I can just come down 6th Ave and meet up with you wherever. My cell # is all over this site so just give me a ring aand we cqan set up a specific spot.

Just Drive Man!!!

IP Logged

justjr
Senior Member

Joined: 23 Feb 2007
Location: United States
Online Status: Offline
Posts: 408

Posted: 29 Sep 2007 at 6:00pm

My cell #, for those that don't know, is 720-281-0595.

If no one calls then we wil see you all there!

Just Drive Man!!!

IP Logged

CO_AVS_FAN
Member
Member

Joined: 02 Mar 2007
Location: United States
Online Status: Offline
Posts: 22

Posted: 29 Sep 2007 at 11:11pm

This might be too late tonight, but how about we meet at the diamond shamrock at Santa Fe and C-470. It is on the south side of C-470.

Edited by CO_AVS_FAN - 30 Sep 2007 at 9:31pm

IP Logged

avalanchuck
Admin Group

Joined: 30 Oct 2006
Online Status: Offline
Posts: 491

Posted: 29 Sep 2007 at 11:14pm

Hey just got back from Steamboat... what time do you want to meet?

2003 Light Pewter Metallic Z71 WBH

IP Logged

CO_AVS_FAN
Member
Member

Joined: 02 Mar 2007
Location: United States
Online Status: Offline
Posts: 22

Posted: 29 Sep 2007 at 11:28pm

How about 7:00 am at Santa Fe and C-470?

IP Logged

GTG Ideas
Colorado Av Club Forums : Local Club Events and Get ToGethers (GTGs) : GTG Ideas

Event: Mod GTG at Springs Auto and Truck - Event Date: 30 Sep 2007
	<< Prev Page of 7 Next >>

Author	Message
beercrazy Senior Member Joined: 19 May 2007 Online Status: Offline Posts: 195	Posted: 25 Sep 2007 at 1:26pm
	Looks like its an 8 to 4 day.....dont forget guys lunch is provided. There is a map link for mapquest in the earlier part of this thread. Ken See ya all there!!!
	Whats you AVitude telling you????
	IP Logged

avalanchuck Admin Group Joined: 30 Oct 2006 Online Status: Offline Posts: 491	Posted: 26 Sep 2007 at 12:46pm
	Ok in an effort to get all the info in one blurb so I can email everyone one last time... *Originally posted by duramaxmaxman* Ok cast and crew were all set for the 30th of September, I will be at the shop there from 8 in the morning till the last person leaves or the boss leaves..I have in the past week purchased a tech 2 scanner and have got the GM link set up to where I can do vehicle programming just like the dealership would do only with me it FREE!! The nice price... I used my truck as the guniea pig for programm updates and to my surprise I had 4 updates that needed to be done, 1 critical transmission shift update for a delayed/soft 1-2 shift. I uploaded the programm just today and have noticed a substancial shift improvement afterwards, so If ya havent done any PCM/VCM updates lately....well now that too can be handled. For those who dont know the location heres a mapquest link. Springs Auto and Truck Any questions anyone might have just post and Ill answer them as quick as possible. Hope for a good turn out. maybe it can be a bi-annual thing.... Ken *Originally posted by duramaxmaxman* Looks like its an 8 to 4 day.....dont forget guys lunch is provided. There is a map link for mapquest in the earlier part of this thread. Ken See ya all there!!! Edited by avalanchuck - 26 Sep 2007 at 12:49pm
	2003 Light Pewter Metallic Z71 WBH
	IP Logged

avalanchuck Admin Group Joined: 30 Oct 2006 Online Status: Offline Posts: 491	Posted: 27 Sep 2007 at 1:05pm
	*Originally posted by avalanchuck* Ok in an effort to get all the info in one blurb so I can email everyone one last time... *Originally posted by duramaxmaxman* Ok cast and crew were all set for the 30th of September, I will be at the shop there from 8 in the morning till the last person leaves or the boss leaves..I have in the past week purchased a tech 2 scanner and have got the GM link set up to where I can do vehicle programming just like the dealership would do only with me it FREE!! The nice price... I used my truck as the guniea pig for programm updates and to my surprise I had 4 updates that needed to be done, 1 critical transmission shift update for a delayed/soft 1-2 shift. I uploaded the programm just today and have noticed a substancial shift improvement afterwards, so If ya havent done any PCM/VCM updates lately....well now that too can be handled. For those who dont know the location heres a mapquest link. Springs Auto and Truck Any questions anyone might have just post and Ill answer them as quick as possible. Hope for a good turn out. maybe it can be a bi-annual thing.... Ken *Originally posted by duramaxmaxman* Looks like its an 8 to 4 day.....dont forget guys lunch is provided. There is a map link for mapquest in the earlier part of this thread. Ken See ya all there!!! Email sent out yesterday! Those heading down from Denver care to meet up somewhere and carAVan down to the Springs? Edited by avalanchuck - 27 Sep 2007 at 1:12pm
	2003 Light Pewter Metallic Z71 WBH
	IP Logged

justjr Senior Member Joined: 23 Feb 2007 Location: United States Online Status: Offline Posts: 408	Posted: 28 Sep 2007 at 8:02am
	Give me a call and let me know when and where.
	Just Drive Man!!!
	IP Logged

CO_AVS_FAN Member Joined: 02 Mar 2007 Location: United States Online Status: Offline Posts: 22	Posted: 28 Sep 2007 at 4:24pm
	Let me know what time you want to meet and where as well. I will be coming from Conifer. So either somewhere on Santa Fe or in Castle Rock is fine with me.
	IP Logged

justjr Senior Member Joined: 23 Feb 2007 Location: United States Online Status: Offline Posts: 408	Posted: 29 Sep 2007 at 6:40am
	On Santa Fe would work for me. I can just come down 6th Ave and meet up with you wherever. My cell # is all over this site so just give me a ring aand we cqan set up a specific spot.
	Just Drive Man!!!
	IP Logged

justjr Senior Member Joined: 23 Feb 2007 Location: United States Online Status: Offline Posts: 408	Posted: 29 Sep 2007 at 6:00pm
	My cell #, for those that don't know, is 720-281-0595. If no one calls then we wil see you all there!
	Just Drive Man!!!
	IP Logged

CO_AVS_FAN Member Joined: 02 Mar 2007 Location: United States Online Status: Offline Posts: 22	Posted: 29 Sep 2007 at 11:11pm
	This might be too late tonight, but how about we meet at the diamond shamrock at Santa Fe and C-470. It is on the south side of C-470. Edited by CO_AVS_FAN - 30 Sep 2007 at 9:31pm
	IP Logged

avalanchuck Admin Group Joined: 30 Oct 2006 Online Status: Offline Posts: 491	Posted: 29 Sep 2007 at 11:14pm
	Hey just got back from Steamboat... what time do you want to meet?
	2003 Light Pewter Metallic Z71 WBH
	IP Logged

CO_AVS_FAN Member Joined: 02 Mar 2007 Location: United States Online Status: Offline Posts: 22	Posted: 29 Sep 2007 at 11:28pm
	How about 7:00 am at Santa Fe and C-470?
	IP Logged